Assembly Instructions - Trestle, Pedestal and Double Pedestal
Assembly of your new Home and Timber hardwood table is pretty straightforward; although, we do not recommend attempting it by yourself. Solid hardwood can be very heavy. Because of this, we strongly recommend having help.
What you will need
4x ½” nuts - included*
4x washers - included*
½” Socket Wrench
Blankets
* nuts and washers are threaded onto the trestle base posts.
Solid Top
- Place the table base in the desired location.
- Place the table top onto the table base lining the holes in the plates on the underside of the table with the post bolts on the trestle base.
- Reach under the table and place a washer on each post bolt.
- Reach under the table and hand thread and tighten a nut on each post bolt.
- Use a ½” socket wrench to tighten each nut onto each post bolt.**
Open Top
- Place table base in desired location.
- Place the table top onto the table base lining the holes in the plates on the underside of the table with the post bolts on the trestle base.
- Open the table top to expose the mounting plates and post bolts.
- Place a washer on each post bolt.
- Hand thread and tighten a nut on each post bolt.
- Use a ½” socket wrench to tighten each nut onto each post bolt.**
** Be Careful to not over tighten the nuts as it can result in the loosening of the post bolts over time.